Everything You Must Know Before Buying Scroll Saws
The type of saw to get is one of the first few things that you want to know either when getting started with scrolling as your livelihood or pastime. There are a number of things that should be taken into mind regardless if you wish to buy your scroll saw or want to make an upgrade.
As you read the next paragraphs, you will be learning valuable tips that can help you ensure that you’ll have a wise decision.
Blade holders and blade changing – pinless blades have a standard 5 inches size and the saw should accept it. There are a lot of scrollwork that couldn’t be done with saws which have pinned blades. While the pinned blades have few benefits, they have one drawback and that is the fact that it is impossible to cut any detail inside since you need to drill a big hole to get the pin of the blade through.
In addition to that, you need to figure out the difficulty of changing the blade and to what tool is required for it. There are scroll saw projects that have hundreds of holes and what is meant by this is, you should remove one end of the blade from the holder and thread it through the wood. Then after that, you have to remount it in holder.
Variable speed – many of the scroll saws do offer variable speed and you should have it in any saw you plan to buy no matter how much it cost. There are cases in which you want the speed of blade to cut slower while at some point, you want to slow it down to be able to avoid having the wood edges burnt while you are cutting.
Vibration – vibration needs to be kept to the very least due to the fact that this is a big disturbance when performing cuts. There are some saws that vibrate more because of the design. As a matter of fact, this is mostly because of the cost of the saw. Fortunately, this issue can be easily dealt with by just mounting the saw to a stand. It is because of the reason that vibration is eliminated by mounting the saw to a sturdy surface.
Size specifications – most of the time, manufacturers list the maximum cutting thickness of saws. Since this is more than 2 inches, you can ignore this as you’ll likely never wish to cut anything thicker than that. The depth of throat is something that you have to consider if you think that you’ll be working on cutting larger projects in the future. It is because the smaller throats might inhibit you from swinging pieces while you are cutting.